added support for ESP32 (untested)

include/WaterMeter.h

@@ -43,8 +43,6 @@
 #define MARCSTATE_RXTX_SWITCH      0x15
 #define MARCSTATE_TXFIFO_UNDERFLOW 0x16
 
-#define CC1101_GDO0 D2   // GDO0 input interrupt pin
-
 #define WRITE_BURST              0x40
 #define READ_SINGLE              0x80
 #define READ_BURST               0xC0

include/hwconfig.h

@@ -0,0 +1,33 @@
+#ifndef __HWCONFIG_H__
+#define __HWCONFIG_H__
+
+#if defined(ESP8266)
+// Attach CC1101 pins to ESP8266 SPI pins
+// VCC   => 3V3
+// GND   => GND
+// CSN   => D8
+// MOSI  => D7
+// MISO  => D6
+// SCK   => D5
+// GD0   => D2  A valid interrupt pin for your platform (defined below this)
+// GD2   => not connected 
+  #define CC1101_GDO0         D2   // GDO0 input interrupt pin
+  #define PIN_LED_BUILTIN     D4
+#elif defined(ESP32)
+// Attach CC1101 pins to ESP32 SPI pins
+// VCC   => 3V3
+// GND   => GND
+// CSN   => 4
+// MOSI  => 23
+// MISO  => 19
+// SCK   => 18
+// GD0   => 32  any valid interrupt pin for your platform will do
+// GD2   => not connected 
+
+// attach CC1101 pins to ESP32 SPI pins
+
+  #define CC1101_GDO0          32
+  #define PIN_LED_BUILTIN      2
+#endif
+
+#endif //__HWCONFIG_H__

platformio.ini

@@ -8,15 +8,23 @@
 ; Please visit documentation for the other options and examples
 ; https://docs.platformio.org/page/projectconf.html
 
-[env:nodemcuv2]
-platform = espressif8266
-board = nodemcuv2
+[platformio]
+;default_envs = esp8266-test
+default_envs = esp32, esp8266
+
+[env:esp32]
 framework = arduino
+platform = espressif32
+board = az-delivery-devkit-v4
+board_build.mcu = esp32
+lib_deps = rweather/Crypto @ ^0.2.0
 
-lib_deps =
-  Crypto
-
+[env:esp8266]
+framework = arduino
+platform = espressif8266
+board = d1_mini_lite
+board_build.mcu = esp8266
+lib_deps = rweather/Crypto @ ^0.2.0
 ; OTA
-upload_port = 10.0.0.86
-#upload_port = 10.14.0.139
-upload_protocol = espota
+;upload_port = 10.0.0.86
+;upload_protocol = espota

src/WaterMeter.cpp

@@ -13,6 +13,7 @@
 */
 
 #include "WaterMeter.h"
+#include "hwconfig.h"
 
 WaterMeter::WaterMeter()
 {
@@ -37,7 +38,7 @@ inline void WaterMeter::waitMiso(void)
 }
 
 // write a single register of CC1101
-void WaterMeter::writeReg(uint8 regAddr, uint8 value) 
+void WaterMeter::writeReg(uint8_t regAddr, uint8_t value) 
 {
   selectCC1101();                      // Select CC1101
   waitMiso();                          // Wait until MISO goes low
@@ -47,7 +48,7 @@ void WaterMeter::writeReg(uint8 regAddr, uint8 value)
 }
 
 // send a strobe command to CC1101
-void WaterMeter::cmdStrobe(uint8 cmd) 
+void WaterMeter::cmdStrobe(uint8_t cmd) 
 {
   selectCC1101();                      // Select CC1101
   delayMicroseconds(5);
@@ -58,9 +59,9 @@ void WaterMeter::cmdStrobe(uint8 cmd)
 }
 
 // read CC1101 register (status or configuration)
-uint8 WaterMeter::readReg(uint8 regAddr, uint8 regType)
+uint8_t WaterMeter::readReg(uint8_t regAddr, uint8_t regType)
 {
-  uint8 addr, val;
+  uint8_t addr, val;
 
   addr = regAddr | regType;
   selectCC1101();                      // Select CC1101
@@ -73,9 +74,9 @@ uint8 WaterMeter::readReg(uint8 regAddr, uint8 regType)
 }
 
 // 
-void WaterMeter::readBurstReg(uint8 * buffer, uint8 regAddr, uint8 len) 
+void WaterMeter::readBurstReg(uint8_t * buffer, uint8_t regAddr, uint8_t len) 
 {
-  uint8 addr, i;
+  uint8_t addr, i;
   
   addr = regAddr | READ_BURST;
   selectCC1101();                      // Select CC1101

src/main.cpp

@@ -12,29 +12,28 @@
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include <ESP8266WiFi.h>
-#include <ESP8266mDNS.h>
-#include <SoftwareSerial.h>
-#include <WiFiUdp.h>
+#if defined(ESP8266)
+  #include <ESP8266WiFi.h>
+  #include <ESP8266mDNS.h>
+  #include <SoftwareSerial.h>
+#elif defined(ESP32)
+  #include <WiFi.h>
+  #include <ESPmDNS.h>
+#endif
 #include <PubSubClient.h>
 #include <ArduinoOTA.h>
 #include "WaterMeter.h"
 #include "credentials.h"
+#include "hwconfig.h"
 
-#define ESP_NAME "ESP-Meter"
-
-// Attach CC1101 pins to ESP8266 SPI pins
-// VCC   => 3V3
-// GND   => GND
-// CSN   => D8
-// MOSI  => D7
-// MISO  => D6
-// SCK   => D5
-// GD0   => D2  A valid interrupt pin for your platform (defined below this)
-// GD2   => not connected 
+#define ESP_NAME "WaterMeter"
 
 #define DEBUG 0
 
+#if defined(ESP32)
+  #define LED_BUILTIN 4
+#endif
+
 //Wifi settings: SSID, PW, MQTT broker
 #define NUM_SSID_CREDENTIALS  3
 const char *credentials[NUM_SSID_CREDENTIALS][4] =